Office Servers and Services

"La connaissance ne vaut que si elle est partagée" / "An effective Knowledge is a shared one"

Archive for 30 mars 2011

Lync 2010 et Citrix XenDesktop 5

Posted by Teruin laurent sur mars 30, 2011


Citrix vient de publier un document sur la façon dont il faut déployer l’environnement Lync sur un environnement Xendesktop. Ceci couvre bien évidement les aspects voix et vidéo. ;-))

Voici l’article que vous pouvez trouver à l’adresse suivante http://support.citrix.com/article/CTX128831

Cordialement
Laurent Teruin

 

« Delivering Microsoft Lync with XenDesktop 5

Document ID: CTX128831 / Created On: Mar 28, 2011 / Updated On: Mar 28, 2011

This article provides guidelines for configuring XenDesktop 5 to deliver Microsoft Lync (formerly Microsoft Office Communicator). Microsoft Lync is a unified communications client used with Microsoft Lync Server that provides instant messaging, voice chat and desktop video conferencing. Citrix XenDesktop with HDX RealTime allows users to communicate using the voice chat and video chat features of Microsoft Lync.

There are three scenarios where HDX RealTime is used with Lync:

  • Voice chat using Voice-over-IP. This feature of Lync is much like using a telephone. It enables users to chat in real time using a headset or USB telephone connected to their computer or thin client.
  • Video conferencing as an observer (voice-only participant). A user may choose to join in a video conference as a voice-only participant. The user can view the video conference and participate in the conversation but does not use a webcam.
  • Video chat using a webcam.

This article describes how to get the best results from both products in these scenarios. It is split into two sections; the first section deals with any configuration changes needed to the XenDesktop 5 environment and the second section looks at Microsoft Lync itself.

For information on using XenApp 6 to deliver Microsoft Office Communicator, see CTX124655 – Best Practice: How to Configure XenApp 6 for Microsoft Office Communicator 2007 R2.

XenDesktop 5 Environment Configuration

The following configuration guidelines for XenDesktop can improve the user experience when using voice chat and/or video chat with Lync. The HDX Monitor should be used to confirm the configuration settings in effect.

Guidelines for Voice Chat

  • If using a USB telephone on the LAN, then isochronous USB redirection over the CTXGUSB « Generic USB » virtual channel is recommended because both signaling and audio are involved.
  • If using a headset, it is generally best to send the audio over the Bidirectional Audio virtual channel (CTXCAM, « Client Audio Mapping ») instead of using USB Redirection (CTXGUSB). This approach minimizes bandwidth consumption. Even if the webcam being used has a built-in microphone, it is generally best to use a headset with a microphone to avoid picking up ambient noise and generating echoes in the audio. Citrix recommends using a good quality headset with noise and echo cancellation. To use speakers and a microphone, you must use version 12.x or above of the Citrix Receiver’s online plug-in for Windows, because you need the echo cancellation feature introduced in that release. If you use the microphone in the webcam, note that there are two types of webcams; ones where the audio device is part of the webcam device and others where the audio device (USB logical arrangement) appears separately. Generally speaking, separate plug-in webcams have the audio and video USB functions combined, but laptop or integrated devices are often (but not always) separate devices. If the audio functionality is a separate USB device, you can redirect the audio separately using Bidirectional Audio.
  • Configure Bidirectional Audio to use the Optimized-for-Speech audio codec (also known as Medium Quality). This codec was introduced in the Citrix Receiver for Windows’ 11.2 online plug-in and in the 11.100 Citrix Receiver for Linux. The bandwidth consumption with this codec is approximately 56 Kbps (28 kilobits per second in each direction). This is a low latency codec that is ideal for voice communications.
  • Voice chat can be used over both LAN and WAN connections. On a WAN connection, audio quality depends on the latency, packet loss, and jitter on the connection. Citrix Branch Repeater should be used on connections to branch offices because it supports QoS for the ICA protocol, allowing the Audio virtual channel to be given priority. An enhancement to mitigate delays because of network congestion was introduced in XenDesktop 4 Virtual Desktop Agent Hotfix 2 (included with XenDesktop 4 Feature Pack 1). With this configuration, audio quality using the Optimized-for-Speech audio codec was subjectively evaluated by our Test engineers as Very Good on a WAN with five percent jitter, up to one percent packet loss (twice the industry standard recommendation for VoIP) and 150 milliseconds roundtrip latency (intercontinental/transoceanic).
  • With XenDesktop 5, the Audio virtual channel priority defaults to Real-time (priority 0), also known as Very High. This is important to minimize latency in the audio path. Use the HDX Monitor to confirm that the Audio virtual channel priority is Real-time. If the priority of the Audio virtual channel is not Real-time, you can correct that using a registry setting.
  • With XenDesktop 5, the Audio service (CtxAudioService.exe) on the Virtual Desktop Agent runs at Above Normal priority. Use the HDX Monitor to confirm that the Audio service is running at Above Normal priority. If the Audio service is not running at Above Normal priority, see « To change the priority of a running program », on the Microsoft Website.

Guidelines for Video Viewing

  • To reduce the CPU load on the VDA platform (server) that results from viewing a video chat session, you can reduce the video display frame rate by setting the following registry entry: HKEY_LOCAL_MACHINE\Software\Citrix\PortICA\Thinwire MaxFramesPerSecond

    The default value is 24 frames per second, but you can reduce that to 15 or 12 frames per second and still have a good video viewing experience. Note that this parameter applies to all server-rendered video, such as QuickTime and Silverlight movies, not to just video conferencing.

  • Similarly, you might need to reduce XenDesktop’s maximum frame rate when delivering video to thin clients with relatively slow processors. Check CPU utilization on the user device. If it is pegging at 100 percent, you likely need to reduce the frame rate at which video is delivered.
  • The quality of video viewing is also impacted by the image compression level used by Progressive Display. Progressive Display controls the quality of images that are dynamically changing, such as video. You can adjust the level of compression applied to dynamic images to find the optimal balance between video quality and bandwidth consumption. Higher compression degrades video quality but generates less data to send over the wire. This not only reduces network bandwidth consumption but can also reduce CPU load. Even though more CPU is used while compressing the images, the reduction in transmission data actually tends to reduce overall CPU consumption. Downstream video traffic typically consumes 800 Kilobits per second to 1.0 megabit per second of network bandwidth with Progressive Display enabled. See CTX124516 – How to Optimize HDX MediaStream Server-Rendered Video (Server-Rendered Multimedia).

Guidelines for Webcam Video Capture

  • XenDesktop 5 features webcam video compression for Microsoft Lync / Office Communicator. This is supported by version 12.0 and above of the Citrix Receiver’s online plug-in for Windows. This optimization is preferable to « raw » isochronous USB direction because much less network bandwidth is consumed. Furthermore, this technology enables webcams to be used over a WAN connection, even at transoceanic latencies (200 millisecond roundtrip). Webcam video compression is enabled by default, as discussed in the online documentation. Typical upstream bandwidth consumption is 300 to 600 Kilobits per second.
  • The Citrix Receiver for Linux also supports webcams, but only using isochronous USB Redirection. This technology is suitable for webcams that are LAN-connected to the data center, but cannot be used across a WAN connection.
  • If using a webcam, Lync must execute directly on the Virtual Desktop Agent (VDA) platform. If Lync is hosted on XenApp 6 and delivered into the virtual desktop through ICA, a webcam cannot be used because double hop is not supported for webcams, regardless of whether using video webcam compression or isochronous USB redirection. Running Lync directly on the VDA platform also ensures the best audio quality for voice chat. So, Lync must be installed in the desktop image or (best practice) streamed to the XenDesktop virtual desktop. Further, Lync and Outlook must co-reside so they can exchange user presence information. Therefore, Outlook must also be installed in the desktop image or (best practice) streamed to the XenDesktop virtual desktop.
  • The webcam requires a driver on the user device to successfully establish USB redirection. On Windows devices, the default driver is usually be suitable, but Citrix recommends obtaining the webcam manufacturer’s driver (latest version) because the default driver might not offer the video color space that the Citrix Receiver’s online plug-in for Windows 12.x is looking for, which could lead to unnecessarily high CPU consumption on the user device as a result of color space conversion. On Linux devices, obtaining a compatible driver is especially critical.
  • Assign two virtual CPUs (vCPUs) to each virtual machine. Real-time video processing is data intensive and configuring two vCPUs reduces the thread switching latency. Note that having two vCPUs does not necessarily mean doubling the number of physical CPUs because physical CPUs can be shared across sessions. If you prefer not to assign two vCPUs to the virtual desktop, you might be able to reduce CPU load sufficiently by turning off the Citrix Gateway Protocol (CGP) used for Session Reliability. Be sure to monitor CPU utilization on the virtual machine to confirm that it does not peg at 100 percent.
  • Advanced settings: Video Resolution
    By default, Citrix Receiver’s online plug-in for Windows uses CIF resolution (352 x 288) to stream webcam video to the host. webcam video resolution can be adjusted by creating two DWORD values named « DefaultWidth » and « DefaultHeight » under HKEY_CURRENT_USER\Software\Citrix\HDXRealTime on the user device. Bear in mind, however, that Lync generally downscales to CIF resolution anyway, so increasing the video resolution over ICA is unlikely to make any visible difference and needlessly consumes additional bandwidth.

Single Server Scalability

Microsoft Lync Configuration

  • In cases where USB Redirection must be used (such as with Linux devices) rather than the default of webcam video compression, network bandwidth consumption is highly dependent on the webcam and how it is configured (frame rate, resolution), and has been observed to vary from 2 megabits per second to 20 megabits per second or even more (typically 2 to 8 megabits per second). The following Microsoft Lync configuration tips can help you to minimize bandwidth consumption when using USB Redirection.

With some webcams, the Microsoft Lync Setup page displays configurable options. For example, with the Microsoft LifeCam VX-1000 there is a USB setting which impacts the bandwidth consumption.

  • Microsoft Lync settings can be manipulated using an Admin Template. The settings below were found to be optimal during testing with a Logitech 9000 Webcam over USB Redirection:
    Compression Enabled
    Video Stream: 700 kilobits per second
    Video Resolution: 640 by 480
  • This configuration resulted in bandwidth consumption of 4 megabits per second peak between two Logitech 9000 Webcams. Of course, it is preferable avoid using USB Redirection because upstream bandwidth consumption is typically only 300 to 600 Kilobits per second when using the webcam video compression feature of XenDesktop.
  • Adjusting the contrast of the webcam can reduce upstream traffic significantly.  »
Publicités

Posted in Lync 2010 | Leave a Comment »

Lync 2010 : Guide de migration OCSR2 vers Lync 2010

Posted by Teruin laurent sur mars 30, 2011


Microsoft vient de publier ce mois-ci (3 Mars 2011) un guide complet sur la migration d’OCSR2 vers Lync 2010. Plus complet que le Technet et surtout plus précis sur les dépendances des étapes.
Indispensable ! Ci-joint la table des matières.

http://www.microsoft.com/downLoads/en/details.aspx?FamilyID=cae132e3-84ab-4110-885c-5bab0e64657e&displaylang=en

Cordialement
Laurent Teruin

 

 

 

 

 

 

 

 

 

Posted in Lync 2010 | Leave a Comment »

LYNC2010 : Un petit script Powershell pour exporter la configuration

Posted by Teruin laurent sur mars 30, 2011


Voici un petit script pour Exporter la configuration d’un environnement Lync. Rien de très difficile me direz-vous mais du simple et efficace. A Copiez coller dans du Powershell Lync2010

Cordialement
Laurent Teruin

 

# General
md lync2010confex
cd lync2010confex
md gene
Get-CsAddressBookConfiguration | Fl >gene\get-csaddressBookConfiguration.txt
Get-CsArchivingConfiguration | fl >gene\Get-CsArchivingConfiguration.txt
Get-CsArchivingPolicy | fl >gene\Get-CsArchivingPolicy.txt
Get-CsCdrConfiguration | fl >gene\Get-CsCdrConfiguration.txt
Get-CsQoEConfiguration | fl >Gene\Get-CsQoEConfiguration.txt
Get-CsConfigurationStoreLocation | fl >gene\Get-CsConfigurationStoreLocation.txt
Get-CsUserDatabaseState >gene\Get-CsUserDatabaseState.txt
Get-CsRegistrarConfiguration >gene\Get-CsRegistrarConfiguration.txt
Get-CsService >gene\Get-CsService.txt
Get-CsWindowsService | fl >gene\Get-CsWindowsService.txt
Get-CsAudioTestServiceApplication >Gene\Get-CsAudioTestServiceApplication.txt
Get-CsHealthMonitoringConfiguration >gene\Get-CsHealthMonitoringConfiguration.txt
Get-CsDiagnosticConfiguration >gene\Get-CsDiagnosticConfiguration.txt

#Web Server and Services Cmdlets
md webconf
Get-CsSimpleUrlConfiguration | fl >webconf\Get-CsSimpleUrlConfiguration.txt
Get-CsWebServiceConfiguration | fl >webconf\Get-CsWebServiceConfiguration.txt
Get-CsKerberosAccountAssignment | fl >webconf\Get-CsKerberosAccountAssignment.txt

# Apps
md apps
Get-CsApplicationEndpoint | fl >apps\Get-CsApplicationEndpoint.txt
Get-CsServerApplication | fl >apps\Get-CsServerApplication.txt
Get-CsTrustedApplication | fl >apps\Get-CsTrustedApplication.txt
Get-CsTrustedApplicationComputer | fl >apps\Get-CsTrustedApplicationComputer.txt
Get-CsTrustedApplicationPool | fl >apps\Get-CsTrustedApplicationPool.txt

#Fed-ext
md fedex
Get-CsAllowedDomain | fl >fedex\Get-CsAllowedDomain.txt
Get-CsBlockedDomain | fl >fedex\Get-CsBlockedDomain.txt
Get-CsExternalAccessPolicy | fl >fedex\Get-CsExternalAccessPolicy.txt
Get-CsHostingProvider | fl >fedex\Get-CsHostingProvider.txt
Get-CsPublicProvider | fl >fedex\Get-CsPublicProvider.txt

#voice Troubleshooting Enterprise Voice Cmdlets
md voice
Get-CsVoiceConfiguration | fl >voice\Get-CsVoiceConfiguration.txt
Get-CsVoiceTestConfiguration | fl >voice\Get-CsVoiceTestConfiguration.txt
Get-CsVoiceNormalizationRule | fl >voice\Get-CsVoiceNormalizationRule.txt
Get-CsDialPlan | fl >voice\Get-CsDialPlan.txt
Get-CsPstnUsage | fl >voice\Get-CsPstnUsage.txt
Get-CsVoicePolicy | fl >voice\Get-CsVoicePolicy.txt
Get-CsRoutingConfiguration | fl >voice\Get-CsRoutingConfiguration.txt
Get-CsVoiceRoute | fl >voice\Get-CsVoiceRoute.txt
Get-CsPstnUsage | fl >voice\Get-CsPstnUsage.txt

#Voice Application Cmdlets
md voiceapp
Get-CsCallParkOrbit | fl >voiceapp\Get-CsCallParkOrbit.txt
Get-CsCpsConfiguration| fl >voiceapp\Get-CsCpsConfiguration.txt

#Exchange UM
md um
Get-CsExUmContact| fl >um\Get-CsExUmContact.txt
Get-CsHostedVoicemailPolicy | fl >um\Get-CsHostedVoicemailPolicy.txt
Get-CsVoicemailReroutingConfiguration | fl >um\Get-CsVoicemailReroutingConfiguration.txt

#Response Group Application
md responsegrp
Get-CsRgsAgentGroup | fl >responsegrp\Get-CsRgsAgentGroup.txt
Get-CsRgsConfiguration | fl >responsegrp\Get-CsRgsConfiguration.txt
Get-CsService -ApplicationServer | Where-Object {$_.Applications -contains « urn:application:RGS »} | ForEach-Object {Get-CsRgsConfiguration -Identity $_.Identity} | fl >responsegrp\Get-CsRgsHolidaySet.txt
Get-CsRgsHoursOfBusiness | fl >responsegrp\Get-CsRgsHoursOfBusiness.txt
Get-CsRgsQueue | fl >responsegrp\Get-CsRgsQueue.txt
Get-CsRgsWorkflow | fl >responsegrp\Get-CsRgsWorkflow.txt

#Unassigned Number
md UnassignedNum
Get-CsUnassignedNumber | fl >UnassignedNum\Get-CsUnassignedNumber.txt
Get-CsAnnouncement | fl >UnassignedNum\Get-CsAnnouncement.txt

#Admission Control
md cac
Get-CsBandwidthPolicyServiceConfiguration | fl >cac\Get-CsBandwidthPolicyServiceConfiguration.txt
Get-CsNetworkBandwidthPolicyProfile | fl >cac\Get-CsNetworkBandwidthPolicyProfile.txt
Get-CsNetworkConfiguration | fl >cac\Get-CsNetworkConfiguration.txt
Get-CsNetworkInterRegionRoute | fl >cac\Get-CsNetworkInterRegionRoute.txt
Get-CsNetworkInterSitePolicy | fl >cac\Get-CsNetworkInterSitePolicy.txt
Get-CsNetworkRegion | fl >cac\Get-CsNetworkRegion.txt
Get-CsNetworkRegionLink | fl >cac\Get-CsNetworkRegionLink.txt
Get-CsNetworkSite | fl >cac\Get-CsNetworkSite.txt
Get-CsNetworkSubnet | fl >cac\Get-CsNetworkSubnet.txt

#Media Bypass
md mediabypass
Get-CsNetworkConfiguration | fl >mediabypass\Get-CsNetworkConfiguration.txt
Get-CsMediaConfiguration| fl >mediabypass\Get-CsMediaConfiguration.txt

#Static Routing
md StaticRouting
Get-CsSipResponseCodeTranslationRule | fl >StaticRouting\Get-CsSipResponseCodeTranslationRule.txt
Get-CsStaticRoutingConfiguration | fl >StaticRouting\Get-CsStaticRoutingConfiguration.txt

#Trunking Configuration
md trunk
Get-CsOutboundTranslationRule | fl >Trunk\Get-CsOutboundTranslationRule.txt
Get-CsTrunkConfiguration | fl >Trunk\Get-CsTrunkConfiguration.txt

#Voice Routing
md voicerouting
Get-CsRoutingConfiguration | fl >voicerouting\Get-CsRoutingConfiguration.txt
Get-CsVoiceRoute | fl >voicerouting\Get-CsVoiceRoute.txt
Get-CsPstnUsage | fl >voicerouting\Get-CsPstnUsage.txt

#PhoneDevic
md PhoneDevic
Get-CsAnalogDevice | fl >PhoneDevic\Get-CsAnalogDevice.txt
Get-CsCommonAreaPhone | fl >PhoneDevic\Get-CsCommonAreaPhone.txt
Get-CsUCPhoneConfiguration | fl >PhoneDevic\Get-CsUCPhoneConfiguration.txt
Get-CsDeviceUpdateConfiguration | fl >PhoneDevic\Get-CsDeviceUpdateConfiguration.txt
Get-CsDeviceUpdateRule | fl >PhoneDevic\Get-CsDeviceUpdateRule.txt
Get-CsTestDevice | fl >PhoneDevic\Get-CsTestDevice.txt

#Lync Management
md Management
Get-CsUICulture | fl >Managment\Get-CsUICulture.txt
Get-CsManagementConnection | fl >Managment\Get-CsManagementConnection.txt

#users
md users
Get-csuser| fl >users\Get-Csuser.txt

Posted in Lync 2010 | Leave a Comment »

LYNC 2010 : Un peu de gestion de service en Powershell

Posted by Teruin laurent sur mars 30, 2011


Pour gérer les services Windows de Lync 2010 pour pouvez utiliser les commandes suivantes

  • Get-CsWindowsService [-Name <String>] [-ComputerName <String>] [-ExcludeActivityLevel <SwitchParameter>] [-Report <String>]
  • Start-CsWindowsService [-Name <String>] [-ComputerName <String>] [-Confirm [<SwitchParameter>]] [-Force <SwitchParameter>] [-NoWait <SwitchParameter>] [-Report <String>] [-WhatIf [<SwitchParameter>]]
  • Start-CsWindowsService [-Confirm [<SwitchParameter>]] [-Force <SwitchParameter>] [-InputObject <NTService>] [-NoWait <SwitchParameter>] [-Report <String>] [-WhatIf [<SwitchParameter>]]
  • Stop-CsWindowsService [-Name <String>] [-ComputerName <String>] [-Confirm [<SwitchParameter>]] [-Force <SwitchParameter>] [-Graceful <SwitchParameter>] [-NoWait <SwitchParameter>] [-Report <String>] [-WhatIf [<SwitchParameter>]]
  • Stop-CsWindowsService [-Confirm [<SwitchParameter>]] [-Force <SwitchParameter>] [-Graceful <SwitchParameter>] [-InputObject <NTService>] [-NoWait <SwitchParameter>] [-Report <String>] [-WhatIf [<SwitchParameter>]]

Voici un petit exemple


 

REDEMARRER LES SERVICES LYNC 2010

Les deux commandes powerShell suivantes permettent de redémarrer les services

Les commandes prennent un peu de temps à l’exécution mais fonctionne correctement

  • Get-CsWindowsService | Stop-CsWindowsService
  • Get-CsWindowsService | Start-CsWindowsService

LISTER LES SERVICES LYNC QUI NE SONT PAS EN FONCTIONNEMENT

Get-CsWindowsService | Where-Object {$_.Status -ne « Running »}

OBTENIR DES INFORMATIONS COMPLEMENTAIRES SUR LES SERVICES

En utilisant le suffixe | Fl de la commande Get-CsWindows Service vous devriez des informations complémentaires et notamment leurs statuts

  • Name : MASTER
  • DisplayName : Agent réplicateur maître Lync Server
  • Status : Running
  • DependentServices : {}
  • ServicesDependedOn : {}
  • CanPauseAndContinue : False
  • CanShutdown : True
  • CanStop : True
  • ServiceType : Win32OwnProcess

 

  • Name : REPLICA
  • DisplayName : Agent réplicateur de réplicas Lync Server
  • Status : Running
  • DependentServices : {}
  • ServicesDependedOn : {}
  • CanPauseAndContinue : False
  • CanShutdown : True
  • CanStop : True
  • ServiceType : Win32OwnProcess

 

  • Name : RTCSRV
  • DisplayName : Serveur principal Lync Server
  • Status : Running
  • DependentServices : {}
  • ServicesDependedOn : {KeyIso}
  • CanPauseAndContinue : False
  • CanShutdown : True
  • CanStop : True
  • ServiceType : Win32OwnProcess

 

  • Name : RTCATS
  • DisplayName : Service de test audio Lync Server
  • Status : Running
  • DependentServices : {}
  • ServicesDependedOn : {}
  • CanPauseAndContinue : False
  • CanShutdown : True
  • CanStop : True
  • ServiceType : Win32OwnProcess

 

  • Name : RTCIMMCU
  • DisplayName : Conférence de messagerie instantanée Lync Server
  • Status : Running
  • DependentServices : {}
  • ServicesDependedOn : {KeyIso}
  • CanPauseAndContinue : True
  • CanShutdown : True
  • CanStop : True
  • ServiceType : Win32OwnProcess

 

  • Name : RTCDATAMCU
  • DisplayName : Conférence Web Lync Server
  • Status : Running
  • DependentServices : {}
  • ServicesDependedOn : {KeyIso}
  • CanPauseAndContinue : True
  • CanShutdown : True
  • CanStop : True
  • ServiceType : Win32OwnProcess

 

  • Name : RTCAVMCU
  • DisplayName : Conférence audio/vidéo Lync Server
  • Status : Running
  • DependentServices : {}
  • ServicesDependedOn : {KeyIso}
  • CanPauseAndContinue : True
  • CanShutdown : True
  • CanStop : True
  • ServiceType : Win32OwnProcess

 

  • Name : RTCASMCU
  • DisplayName : Partage d’application Lync Server
  • Status : Running
  • DependentServices : {}
  • ServicesDependedOn : {KeyIso}
  • CanPauseAndContinue : True
  • CanShutdown : True
  • CanStop : True
  • ServiceType : Win32OwnProcess

 

  • Name : RTCMEDSRV
  • DisplayName : Médiation Lync Server
  • Status : Running
  • DependentServices : {}
  • ServicesDependedOn : {KeyIso}
  • CanPauseAndContinue : True
  • CanShutdown : True
  • CanStop : True
  • ServiceType : Win32OwnProcess

 

  • Name : RTCMEETINGMCU
  • DisplayName : Compatibilité de la conférence Web Lync Server
  • Status : Running
  • DependentServices : {}
  • ServicesDependedOn : {KeyIso}
  • CanPauseAndContinue : True
  • CanShutdown : True
  • CanStop : True
  • ServiceType : Win32OwnProcess

 

  • Name : FTA
  • DisplayName : Agent de transfert de fichiers Lync Server
  • Status : Running
  • DependentServices : {}
  • ServicesDependedOn : {}
  • CanPauseAndContinue : False
  • CanShutdown : True
  • CanStop : True
  • ServiceType : Win32OwnProcess

Cordialement

Laurent TERUIN

Posted in Lync 2010 | Leave a Comment »

LYNC 2010 : LS Archiving Agent error 30509

Posted by Teruin laurent sur mars 30, 2011


L’agent d’archivage Lync Server n’a pas pu créer de file d’attente d’administration locale pour les accusés de réception. Cause : cela peut se produire si le service Message Queuing n’est pas disponible ou s’il n’est pas installé avec l’intégration Active Directory.

Résolution : Vérifiez que Message Queuing est installé avec l’intégration Active Directory et qu’il fonctionne correctement. Si ce n’est pas le cas, réinstallez le service Message Queuing avec l’intégration Active Directory, puis redémarrez Message Queuing.

 


Cet Evènement ce produit si vous n’avez pas installé la fonctionnalité. Procédez à son installation. L’erreur devrait disparaître


Cordialement

Laurent Teruin

Posted in Lync 2010 | Leave a Comment »

LYNC 2010 : Erreur d’activation Utilisateur : 00002098:SecErr:DSID-03150BB9

Posted by Teruin laurent sur mars 30, 2011


ACTIVATION

Si vous tentez d’activer un utilisateur Lync 2010 qui est administrateur du domaine vous allez rencontrer ce problème

Echec de l’opération Active Directory sur « DC.unifiedit.it ». Vous ne pouvez pas retenter cette opération.  » Droits d’accès insuffisants pour effectuer cette opération » 00002098:SecErr:DSID-03150BB9, Problem 4003 (INSUFF_ACCESS-RIGHTS),0
ou Insufficien access rights to perform the operation 00002098: SecErr: DSID-03150BB9


Pour ce faire utilisez la commande Powershell lync 2010 suivante

Enable-CsUser -Identity « lteruin » -RegistrarPool « srv-lync.unifiedit.it » -SipAddress sip:lteruin@unifiedit.it

Enable-CsUser -Identity <UserIdParameter> [-Confirm [<SwitchParameter>]] [-DomainController <Fqdn>] [-HostingProviderProxyFqdn <Fqdn>] [-PassThru <SwitchParameter>] [-ProxyPool <Fqdn>] [-RegistrarPool <Fqdn>] [-SipAddress <String>] [-SipAddressType <FirstLastName | EmailAddress | UserPrincipalName | SAMAccountName | None>] [-SipDomain <Fqdn>] [-WhatIf [<SwitchParameter>]]

http://technet.microsoft.com/en-us/library/gg398711.aspx

MIGRATION

Le même phénomène se produit lorsque vous migrez des utilisateurs depuis OCS. Pour cela utiliser la commande powershell suivante :

Move-CsUser -Identity <UserIdParameter> -Target <Fqdn> [-Confirm [<SwitchParameter>]] [-DomainController <Fqdn>] [-Force <SwitchParameter>] [-PassThru <SwitchParameter>] [-ProxyPool <Fqdn>] [-WhatIf [<SwitchParameter>]]

http://technet.microsoft.com/en-us/library/gg398528.aspx

SUPPRESSION

Lorsque vous voulez supprimer un utilisateur admin du domaine vous aurez le message suivant


Utilisez alors la commande powershell suivante :

Disable-CsUser -Identity <UserIdParameter> [-Confirm [<SwitchParameter>]] [-DomainController <Fqdn>] [-PassThru <SwitchParameter>] [-WhatIf [<SwitchParameter>]]

Cordialement

Laurent Teruin

Posted in Lync 2010 | Leave a Comment »